Serial Number Information for John Deere 1250
| Serial Number: | Year Made: | Plate Location: |
| 1000 | 1982 | Below the PTO on rear of transfer case |
| 1256 | 1983 | Below the PTO on rear of transfer case |
| 3001 | 1984 | Below the PTO on rear of transfer case |
| 4001 | 1985 | Below the PTO on rear of transfer case |
| 5001 | 1986 | Below the PTO on rear of transfer case |
| 5501 | 1987 | Below the PTO on rear of transfer case |
| 5785 | 1988 | Below the PTO on rear of transfer case |
Specifications
Specifications for John Deere 1250
| Make: Yanmar | Model: 1250 | Years Made: n/a |
| Factory: Japan | Chassis: 4x2 2WD | Wheelbase: 71.8 inches [182 cm] |
| Front tire: 9.5-24 | Rear tire: 14.9-28 | Weight: 4125 to 5180 pounds |
| Length: n/a | Width: n/a | Height: n/a |
| Elec. Grounding: negative | Elec. Charging Amps: 25 | Elec. Volts: n/a |
| Hitch Rear Type: II/I | Hitch Rear Lift: n/a | Fuel Capacity: 17.2 gal [65.1 L] |
| Hydraulics Type: open center | Hydraulics Capacity: n/a | Hydraulics Pressure: n/a |
| Hydraulics Valves: 0 to 2 | Hydraulics Total Flow: n/a | Hydraulics Valve Flow: n/a |
| Steering: power assist | Brakes: differential hydraulic wet disc | New Price: $18,700 (1988) |
Powertrain
Powertrain for John Deere 1250
| Engine type: Yanmar | Cylinders: 3 | Displacement: 142.7 ci [2.3 L] |
| Bore/Stroke: 3.74x4.33 inches [95 x 110 mm] | Compression: 18:1 | RPM: 2500 |
| Gross Power: n/a | Torque: n/a | Torque RPM: n/a |
| Net Power: n/a | PTO: n/a | Drawbar: n/a |
| Rear PTO: continuous | Rear RPM: 540 | Clutch: n/a |
| Cooling: liquid | Coolant: 8.4 qts [7.9 L] | Air Cleaner Type: n/a |
| Oil Capacity: 11.2 qts [10.6 L] | Oil Change: n/a | Fuel: diesel |
| Transmission Type: sliding gear | Gears: 9 forward and 3 reverse |
Paint Codes
Sorry, no paint information available for John Deere 1250 