Serial Number Information for Allis Chalmers D10
| Serial Number: | Year Made: | Plate Location: |
| 1001 | 1959 | Torque housing |
| 1950 | 1960 | Torque housing |
| 2801 | 1961 | Torque housing |
| 4511 | 1962 | Torque housing |
| 6801 | 1963 | Torque housing |
| 7675 | 1964 | Torque housing |
| 9204 | 1965 | Torque housing |
| 9486 | 1966 | Torque housing |
| 9795 | 1967 | Torque housing |
Specifications
Specifications for Allis Chalmers D10
| Make: Allis Chalmers | Model: D10 | Years Made: n/a |
| Factory: West Allis, Wisconsin, USA | Chassis: 4x2 2WD | Wheelbase: 78.75 inches [200 cm] |
| Front tire: 4.00x15 | Rear tire: 9x24 | Weight: 2700 to 4800 pounds |
| Length: 120.5 inches [306 cm] | Width: n/a | Height: 76 inches [193 cm] |
| Elec. Grounding: n/a | Elec. Charging Amps: n/a | Elec. Volts: n/a |
| Hitch Rear Type: I | Hitch Rear Lift: n/a | Fuel Capacity: 12 gal [45.4 L] |
| Hydraulics Type: live | Hydraulics Capacity: n/a | Hydraulics Pressure: n/a |
| Hydraulics Valves: 1 or 2 | Hydraulics Total Flow: n/a | Hydraulics Valve Flow: n/a |
| Steering: manual | Brakes: differential mechanical shoe | New Price: $3400 (1967) |
Powertrain
Powertrain for Allis Chalmers D10
| Engine type: Allis-Chalmers Power-Crater vertical L-head | Cylinders: 4 | Displacement: 138.7 ci [2.3 L] |
| Bore/Stroke: 3.375x3.875 inches [86 x 98 mm] | Compression: 7.75:1 | RPM: 1650 |
| Gross Power: n/a | Torque: n/a | Torque RPM: n/a |
| Net Power: n/a | PTO: n/a | Drawbar: n/a |
| Rear PTO: transmission (original), independent (later) | Rear RPM: 540 | Clutch: n/a |
| Cooling: liquid | Coolant: 8 qts [7.6 L] | Air Cleaner Type: oil bath |
| Oil Capacity: 4 qts [3.8 L] | Oil Change: n/a | Fuel: gasoline |
| Transmission Type: sliding gear | Gears: 4 forward and 1 reverse |
Paint Codes
Sorry, no paint information available for Allis Chalmers D10 
